frequencies

Minimum payroll frequencies are determined by each state and can be quite confusing.  I’m often asked “How often do I have to pay my employees” during a Certified Payroll Training Webinar.  State minimum paycheck frequencies are shown below – this information comes directly from the U.S. Department of Labor’s website.

QuickBooks payroll tipsIt’s difficult to thoroughly cover the requirements of all 50 states in a 2 hour webinar, but it has crossed my mind that a series of blog posts on the differences between what State Laws are for how often payroll must be generated and how that can effect the generation of a certified payroll report would be a good thing to do.  While I could have simply started this series and talked about the complexities of generating certified payroll reports when issuing employee payroll on anything other than a weekly basis  – I first wanted to display the requirements by state, rather than just put off a link to the U.S. Department of Labor website.

Under the Federal Davis-Bacon and related Acts; contractors and subcontractors performing work on Federal or Federally-aided construction-type contracts are required to submit weekly payrolls.  The Copeland Act provides further/clearer requirements; indicating that contractors and subcontractors performing work on Federally financed or assisted construction contracts “furnish weekly a statement with respect to the wages paid to each employee during the preceding week”.

Obviously, contractors and subcontractors who issue their payroll on a weekly basis find the necessary information easier to obtain; therefore, making compliance simpler to obtain.

State

Weekly

Bi-Weekly

Semi-Monthly

Monthly

Alaska X X
Arizona X 3
Arkansas X
California X 9 X 9 X
Colorado X
Connecticut X 4
Delaware X
District of Columbia X
Georgia X
Hawaii X X 5
Idaho X
Illinois X X 2
Indiana X
Iowa X X 6 X X
Kansas X
Kentucky X
Louisiana X X 7
Maine X 8
Maryland X
Massachusetts X X
Michigan 9 X X X
Minnesota X 10
Mississippi X 11 X 11
Missouri X
Montana 12
Nebraska 13
Nevada X X 2
New Hampshire X
New Jersey X
New Mexico X X 2
New York X 14 X 14
North Carolina 15
North Dakota X
Ohio X
Oklahoma X
Oregon X
Pennsylvania 13
Rhode Island X 16
South Dakota X
Tennessee X
Texas X X 17
Utah X 18
Vermont X X 19 X 19
Virginia X 20 X 20 X 2
Washington X
West Virginia X
Wisconsin X
Wyoming X
  1. Alabama and South Carolina – No regulations or not specified.
  2. Illinois, Nevada, New Mexico and Virginia – Monthly payday requirements for Executive, Administrative, and Professional personnel.
  3. Arizona – Payday two or more days in a month, not more than 16 days apart.
  4. Connecticut – Longer interval (up to monthly) permitted if approved by Labor Commissioner.
  5. Hawaii – Employees may choose to be paid on a monthly basis under special election procedure.  Director of Labor and Industrial Relations also may grant exceptions to the general semi-monthly payday requirement.  Payday requirement applies only to private sector employment.
  6. Iowa – Any predictable and reliable pay schedule is permitted as long as employees get paid at least monthly and no later than 12 days {excluding Sundays and legal holidays} from the end of the period when the wages were earned.  This can be waived by written agreement; employees on commission have different requirements.
  7. Louisiana – Applicable to entities engaged in manufacturing, mining, or boring for oil, employing 10 or more employees, and to every public service corporation.  Payment is required once every two weeks or twice during each calendar month.
  8. Maine – Payment due at regular intervals not to exceed 16 days.
  9. California and Michigan – Frequency of payday depends on the occupation.
  10. Minnesota – Employees engaged in transitory employment, i.e. migrant workers, which require and employee to change the employee’s pace of abode, because the employment is terminated wither by the completion of the work or by the discharge or quitting of the employee must be paid within 24 hours.
  11. Mississippi – Applicable to every entity engaged in manufacturing of any kind in the State, employing 50 or more employees and employing public labor, and to every public service corporation doing business in the State.  Payment is required once every two weeks or twice during each calendar month.
  12. Montana – Wages must be paid within 10 business days after the wages are due and payable.
  13. Nebraska and Pennsylvania – Payday designated by employer.
  14. New York – Weekly payday for manual workers.  Semi-monthly payday upon approval for manual workers and for clerical and other workers.
  15. North Carolina – None specified, pay periods may be daily, weekly, bi-weekly, semi-monthly or monthly.
  16. Rhode Island – Childcare providers shall have the option to be paid every two weeks.
  17. Texas – Monthly payday for employees exempt from overtime provisions of the Fair Labor Standards Act.
  18. Utah – Payments are to be paid at regular intervals but in periods no longer than semi-monthly.
  19. Vermont – Employers may implement bi-weekly and semi-monthly payday with written notice
  20. Virginia – Employees whose weekly wages total more than 150% of the average weekly wage of the Commonwealth may be paid monthly, upon agreement of each affected employee.

NOTE:  South Carolina – Employers with 5 or more employees are required to give written notice at the time of hiring to all employees advising them of their wages agreed upon, and the time and place of payment along with their expected hours of work.  The employer must pay on the normal time and at the place of payment established by the employer.

Stay tuned over the next week to find out some of the problems that can occur when a company follows various state payroll requirements {bi-weekly, semi-monthly, and monthly paychecks} and how the pay frequencies affect the submission of their certified payroll reports.

Friday is Free eBook day, here on the QuickBooks for Contractors blog it’s better known as Freebie Friday!  Each Friday we’ll tell you about a free eBook that we’ve found or one that we have created.  Look for eBooks on a variety of educational topics.

Free eBook – An Introduction to Lead Generation

Freebie Friday eBooksBy now, many businesses understand that lead volume is based on a wide array of factors, ranging from social media presence, to blogging frequency, to online content.

Learn how to effectively generate traffic and leads for your business.

Download HubSpot’s 39-page ebook, which will walk you through the basics of lead generation and discuss techniques for optimizing your lead gen strategy.

In this free ebook, you’ll learn:

  • The fundamental tactics for lead generation
  • Techniques for maximizing your reach and lead flow
  • Methods for improving lead generation results

Get started by completing the request form on Hubspot’s website to download the “An Introduction to Lead Generation” eBook today!

We hope you find today’s eBook to be helpful, if so please take a moment to leave a comment or to share this post on your favorite social networking site.

Have a great weekend

A reader asked the following question regarding paying employees using different frequencies:

Common payroll mistakes during the check cutting processWe are new to QuickBooks payroll and would like to set up different pay frequencies for our employees, as follows:

  • Company officers – monthly salary
  • Clerical staff – hourly basis, bi-weekly
  • Field Workers – hourly basis, weekly

How do we accomplish this when using QuickBooks?

_______________________________________________________

Answer:

Yes, you can accomplish this when using QuickBooks Basic, Enhanced, or Assisted Payroll.

QuickBooks allows you to create a “Pay Frequency”  and a “Payroll Schedule” to meet your various payroll needs.

Begin by going to the QuickBooks Employee Center and clicking on the Employees tab.

Pick an employee and choose the Edit Employee button, switch to the Payroll & Compensation Info tab.  In the upper right corn you will see a Payroll Schedule option, this is where you will create a new Payroll Schedule and corresponding Pay Frequency.

From the Payroll Schedule dropdown menu choose Add New, below is the setup for a bi-weekly payroll schedule:

creating a payroll frequency in QuickBooks

There are two very critical dates that you must enter when you create a new Payroll Schedule, they are:

  1. What is the pay period end date? This date should be the date the the first bi-weekly payroll will end on.
  2. What date should appear on paychecks for this pay period? This date should be the date that the first bi-weekly paycheck will be run.

The screenshot above indicates the following information:

The bi-weekly pay period will end on Saturday July 10, 2010 and we will process payroll checks (date of checks) on Wednesday July 17, 2010.

Once you have created your Payroll Frequency/Schedule you will then edit each employee’s record, going to the Payroll & Compensation Info tab as select the appropriate frequency (Weekly, Bi-Weekly, or Monthly).

When you are ready to actually pay your employees, go to the Employee Center and click on the Payroll tab, each of your Payroll Frequencies will be displayed, click on the appropriate frequency (Weekly, Bi-Weekly, or Monthly) and click the Start Scheduled Payroll button.

Payroll schedule

We hope you have found this QuickBooks Payroll Tip to be helpful, if so, please feel free to leave us a comment below.

Search…….

Loading

FREE 30-Day Trials

Request FREE 30-day Trials of QuickBooks add-ons for Certified Payroll, AIA Billing & Payroll Wage Management.
Free 30 day trials of QuickBooks integrated add-ons for certified payroll, aia billing and weighted-average overtime
February 2012
S M T W T F S
« Jan    
 1234
567891011
12131415161718
19202122232425
26272829  
Top 10 Blogger Award Toolbox for Finance